Wanted Toll Refining

[ssmontecarlo]

Hello to all. I'm looking for an toll refiner near me. I'm located near Chattanooga,TN. If anyone is near by and interested, just contact me back.
Thank You and Be Safe

 

[Shark]

I am around 50 miles from Chattanooga. If I can’t do it, It would still be nice to sit over a cup of coffee sometime with another person with similar interests. Maybe help you get up to doing some of it yourself, if that could help.

 

[kurtak]

Hello to all. I'm looking for an toll refiner near me. I'm located near Chattanooga,TN. If anyone is near by and interested, just contact me back.
Thank You and Be Safe

What kind of material are you wanting refined - it can make a difference as some people are set up to refine some types of material but not other types of material

As well how much material do you have as that can make a difference on whether or not it is worth while doing the refine

Picture of what you have would be good

I am around 50 miles from Chattanooga. If I can’t do it, It would still be nice to sit over a cup of coffee sometime with another person with similar interests. Maybe help you get up to doing some of it yourself, if that could help.

I have personally met Shark (been to his home) & we speak from time to time on the phone - IMO it would be well worth your time to meet with him even if it's just for a cup of coffee or just a phone call

Kurt

 

[orvi]

Hello to all. I'm looking for an toll refiner near me. I'm located near Chattanooga,TN. If anyone is near by and interested, just contact me back.
Thank You and Be Safe

Describe the material at least briefly. You will get much better feedback then Quantity will also be very important metric.

As it was said, somebody is set up for certain refining pathways, and can only process some kinds of scrap.

 

[ssmontecarlo]

Describe the material at least briefly. You will get much better feedback then Quantity will also be very important metric.

As it was said, somebody is set up for certain refining pathways, and can only process some kinds of scrap.

Yes. Thank You.

I am around 50 miles from Chattanooga. If I can’t do it, It would still be nice to sit over a cup of coffee sometime with another person with similar interests. Maybe help you get up to doing some of it yourself, if that could

What kind of material are you wanting refined - it can make a difference as some people are set up to refine some types of material but not other types of material

As well how much material do you have as that can make a difference on whether or not it is worth while doing the refine

Picture of what you have would be good


I have personally met Shark (been to his home) & we speak from time to time on the phone - IMO it would be well worth your time to meet with him even if it's just for a cup of coffee or just a phone call

Kurt

 

[BGDOCK]

Looks like my garage
Add tool boxes and a dodge dart
Bikes, 15 year of accumulation of things and a 1/2 feral cat

 

[ssmontecarlo]

The bag of chips are mostly gold pin chips..ceramic and green fiber backs...I'm gonna guess..15- 20 lbs.
Ram cards...majority has had all gold fingers removed. They still have the chips on them. To guess weight...30-40 lbs..
35 laptop computers...which I would take apart.
Boards...well if a board weighs a pound...I got easily 50- 60 lbs.
Cell phones...50 or 60.
Hard drives...70-80
I still have about 20 desk top computer towers to take apart.
Monitors..25 or 30
Flat screen tv...30 -40 of them.
The greatest Majority of boards are still whole. Cpu been removed but other than that..all the pins, cold corner bga are on them.
I would separate/ remove from board. Remove the pinless/ metal legged pins from ram cards.
All cell phones are without battery and sim card are removed.
Got some silver ram cards.
There are some ram, sound, and graphic cards with gold fingers on them. That what I normally process first...it's the easiest.
Keyboards..probably 35 or 40 .
I can give a better poundage number...I need go buy a bathroom scale.
If interested just let me know

 

[Shark]

Start by checking thrift stores or garage sales for a rotisserie oven. Use 1/4 by 1/4 hardware cloth to create a basket around the rotating part. This will remove the IC’s from trimmed or untrimmed memory sticks.

Something like this….

Rotisserie Oven

 

[ssmontecarlo]

Looks like my garage
Add tool boxes and a dodge dart
Bikes, 15 year of accumulation of things and a 1/2 feral cat

It's all piled in an 94 suburban..4L60E junk..