Non-Chemical G F Watchbands

[glondor]

Hey all, how are things. I have recently received a batch of GF mesh watch bands and I was wondering if any one would care to share any tips or methods for these in particular. Bands of this type>>>
https://www.google.ca/searchq=gold+filled+mesh+watch+bands&hl=en&prmd=imvns&source=lnms&tbm=isch&ei=3kioT9HZJuqD6AHR7d2gBA&sa=X&oi=mode_link&ct=mode&cd=2&ved=0CC8Q_AUoAQ&biw=1024&bih=677

Other than a good incineration I am not sure if these should be done like other GF scrap. Generally I just break up GF and incinerate and dissolve in 50/50 nitric.

Thanks Mike.

 

[skeeter629]

I have had good luck cutting the mesh into small lengths so the acid can work from both ends. I process them in 50/50 nitric.

 

[Barren Realms 007]

I try to remove anything magnetic and process them like regular GF. There is a lot of surface area for the acid to attack so be careful on how much you try to push your reaction.

 

[glondor]

10/4. Sounds good to me. Thanks guys.