G godofwar Well-known member Joined Jan 12, 2011 Messages 46 Feb 21, 2011 #1 ok i searched with no result. so i am sorry if this has been covered. ok i have some boards that UNDER the green/black coating the pathways and what is normally copper is gold..... what is the best method to get that out of there....
ok i searched with no result. so i am sorry if this has been covered. ok i have some boards that UNDER the green/black coating the pathways and what is normally copper is gold..... what is the best method to get that out of there....
lazersteve Well-known member Moderator Emeritus Joined Feb 27, 2007 Messages 7,334 Location Florida Feb 21, 2011 #2 Put solder mask in the search box. After that put gold traces in the search box. You'll get plenty of hits. The same results can be seen in the Guided Tour Link following the Rough Guide to the Forum Steve
Put solder mask in the search box. After that put gold traces in the search box. You'll get plenty of hits. The same results can be seen in the Guided Tour Link following the Rough Guide to the Forum Steve