Old ribbon connectors

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Can anyone advise please.

I regularly find these older ribbon connectors in old pcs. Normally the tips of the pins have a tiny dot of gold, but these are fully plated. However, I’m not convinced this is gold as the metal has a slight greenish tint to it. Advice please.View attachment 64890
Test it to see, snip off a tiny piece and put it in HCl.
If all disappears it is brass.
Is it from a good brand of boards?
 
Test it to see, snip off a tiny piece and put it in HCl.
If all disappears it is brass.
Is it from a good brand of boards?
Not sure about the quality of the boards as I have stripped so many and stockpiled the connectors. I will try the HCL when I get a chance. In the meantime I have segregated all I find just in case there was a contamination issue later.
Thanks for the advice.
 
Not sure about the quality of the boards as I have stripped so many and stockpiled the connectors. I will try the HCL when I get a chance. In the meantime I have segregated all I find just in case there was a contamination issue later.
Thanks for the advice.
I have seen fully plated connectors like this only on higher end boards.
 

Latest posts

Back
Top