M masihrashidi Member Joined Nov 6, 2010 Messages 16 Nov 20, 2010 #1 any one work on refining lead and tin from board i belief that it will be so useful
w0lvez Well-known member Joined Nov 20, 2010 Messages 75 Location Behind YOU Nov 20, 2010 #2 I think it is just a waste of time doing that. It's more easier if you will use a solder with 60/40 Tin-lead
I think it is just a waste of time doing that. It's more easier if you will use a solder with 60/40 Tin-lead