Single heavy duty barrelling machine

[Dan72ccx]

http://www.goldline.co.uk/queryToolsProducts.do?catid=5&pagenum=11
EQBM005 Single heavy duty barrelling machine
Professional quality unit with a 15lb capacity. Hexagon steel barrel with removeable liner
Hi is that anny good for youth for ball milling ?
Thanks Dan

 

[4metals]

Those are used to polish jewelry or even tumble rocks but the heavy pounding required for crushing will eat that thing up. It's rubber lined and that will wear off quickly.

Now the same drive rollers with one of these http://www.detroitprocessmachinery....42-U.S._Stoneware_Ceramic_Jar_Mill_print.html
and crush effectively. They are heavy ceramic and quite pricey.

 

[Dan72ccx]

Thank you 4metals

 

[Dan72ccx]

http://unitednuclear.com/index.php?main_page=product_info&cPath=25_35&products_id=364

 

[4metals]

Getting better, it all comes down to what you want to crush. For burned polishing sweeps it should be OK with 3/4" steel balls. For ceramic circuits I think you will need more crushing power.What are you looking to crush?

 

[Dan72ccx]

http://cgi.ebay.co.uk/18-10-Stainless-steel-50-Ltr-tank-container-liquids-NEW-/160573189163?_trksid=p3286.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D8874754795666811913
How abaut to biuld one
For ceramic and circuits
Thanks for helping

 

[qst42know]

A brewing keg?

I'd be willing to bet the wall thickness on that stainless can is only around .020". The horizontal ribs in the can shown in the photo are to give thin material a modest degree of rigidity. This won't last as a ball mill.

 

[Dan72ccx]

:mrgreen: Will done by tomorrow will shere the pikture