skinny
Well-known member
guys check out the attachment i was wondering if anyone has experience with this type of scrubber and how to use it i know kind of how it works but i dont know what fittings tubes filters how and were to run my lines in the fume hood etc and im looking for some help. i dont understand the scrubbers well enough to be able to build one and i found this one here at a semi affordable price and id like to give it a try and maybe help someone else who might need something like this. the description says it comes with the packing and everything but want to double check its the right stuff. also with a scrubber like this can i build a simple fume hood with a sash with a venturi blower setup and exhaust the fumes straight out the roof from my fume hood? i know there will be fugitive gases and that the scrubber im looking at isnt that big as far as the volume it can take. essentially i understand the fumes are corrosive and over time the fugitive fumes will eat it but im wondering if its at an acceptably slow enough pace i dont need to spend another 500 dollars on an air scrubber as well i want to be safe but not overkill
https://www.amazon.com/Chemglass-CG-1830-52-Column-Scrubber-100mm/dp/B08R3HT7J9
\
https://www.amazon.com/Chemglass-CG-1830-52-Column-Scrubber-100mm/dp/B08R3HT7J9
\
Attachments
Last edited: