Got for free

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This kind of material is well suited for HCl/Bleach, HCl/Peroxide or similar.
Additionally the next step is to dissolve the Gold anyway so one can go directly to AR if one so wish.
I don’t think I’m going to go straight AR as I did that with the last debacle you helped me with lol, don’t want to get myself into that situation again.
 
I don’t think I’m going to go straight AR as I did that with the last debacle you helped me with lol, don’t want to get myself into that situation again.
I usually run those in AR. Or yggdrasils favorite, HCl and bleach. Funny how that works at times:oops:.
 
I usually run those in AR. Or yggdrasils favorite, HCl and bleach. Funny how that works at times:oops:.
I was going to but then I freaked myself out because last time I ran a bunch of connectors, didn’t remove the tin first and ran into BIG problems so I figured a stitch in time saves nine right.
 
I was going to but then I freaked myself out because last time I ran a bunch of connectors, didn’t remove the tin first and ran into BIG problems so I figured a stitch in time saves nine right.
Yep, most of the time it does.
 
Ok guys so I’m truely perplexed now. I’ve added the smb to precipitate gold from solution, this morning I noticed a little bit of gold in the bottom of the two beakers it’s 70 Fahrenheit. I did a stannous check and came back super dark for a positive result, So I’m going to wait another day or two to see if it just needs more time or if I need to add more smb
 
Ok guys so I’m truely perplexed now. I’ve added the smb to precipitate gold from solution, this morning I noticed a little bit of gold in the bottom of the two beakers it’s 70 Fahrenheit. I did a stannous check and came back super dark for a positive result, So I’m going to wait another day or two to see if it just needs more time or if I need to add more smb
Also I did not add urea so would that put my gold back into solution
 
Ok guys so I’m truely perplexed now. I’ve added the smb to precipitate gold from solution, this morning I noticed a little bit of gold in the bottom of the two beakers it’s 70 Fahrenheit. I did a stannous check and came back super dark for a positive result, So I’m going to wait another day or two to see if it just needs more time or if I need to add more smb
Super dark says nothing.
It can be a lot of things.
Take a few drops and dilute it.
If neccessary do it again until you have a color.
Besides that it need to be acidic for the SMB to work.
How did you dissolve it?
AR or HCl/bleach?
 
Ok guys so I’m truely perplexed now. I’ve added the smb to precipitate gold from solution, this morning I noticed a little bit of gold in the bottom of the two beakers it’s 70 Fahrenheit. I did a stannous check and came back super dark for a positive result, So I’m going to wait another day or two to see if it just needs more time or if I need to add more smb
This is how it should look:
Cutout from Lazersteves picture:
1736964098866.png
 
Super dark says nothing.
It can be a lot of things.
Take a few drops and dilute it.
If neccessary do it again until you have a color.
Besides that it need to be acidic for the SMB to work.
How did you dissolve it?
AR or HCl/bleach?
I’ll take a pic of the stannous test when I get home in about 10 minutes. I didn’t add anything to neutralize the solution, I used AR to put the gold into solution, I didn’t get the dreaded metastannic acid this time so a big improvement from the last go around
 
I’ll take a pic of the stannous test when I get home in about 10 minutes. I didn’t add anything to neutralize the solution, I used AR to put the gold into solution, I didn’t get the dreaded metastannic acid this time so a big improvement from the last go around
How much Nitric did you use?
 
Back
Top