Thanks, I am aware of this I have a tinny little bead of gold that I will test on to see if I can get it dissolved in solution. The starting list will be 1/4 tea spoon of copper sulfate, then I will add 3 tea spoons of sodium thiosulfate, then i will add 3 tea spoons ammonium sulfate and then I will use ammonia as the liquid no water will be added. Will let it sit for a few days then will check the result and see if the bead is reducing in size.
Thanks, I am aware of this I have a tinny little bead of gold that I will test on to see if I can get it dissolved in solution. The starting list will be 1/4 tea spoon of copper sulfate, then I will add 3 tea spoons of sodium thiosulfate, then i will add 3 tea spoons ammonium sulfate and then I will use ammonia as the liquid no water will be added. Will let it sit for a few days then will check the result and see if the bead is reducing in size.
The stainless only gets eaten when the voltage is to high. Above 3.5 volts your stainless starts going. I did it so I would know. Now have nickel and cadnium in the junk so gonna try and figure out how to get it out. Hoping it didn't make a complex with the thiosulphate and is sitting on the bottom in the sludge.
