2.2g refined 99X gold is my guess.
Estimate on pin yield.
- Thread starter glondor
- Start date
Help Support Gold Refining Forum:
I am amazed at how close so many of you are to the actual yield. The total for the pins is 2.27 g. I think steyr 223 is the closest with a guess of 2.23. We are starting to get some good eyes for pin yield. Good job to all those in the 2 g range.
necromancer
Well-known member
i was 3g to high
but seeing those in person i got to see that they were not as good looking as the photo.
but seeing those in person i got to see that they were not as good looking as the photo.
Geo
Well-known member
i was off by .22g, which isnt too bad on that much material.
steyr223
Well-known member
A .. Um .... He he ..opps :roll:
Sorry guys.,you all did notice my
Guess was.not based on science or math
But my name hence, 223 which i guess for
U guys across the pond is 5.56 :lol:
Go figure, i wish i could do that.with refining
My stuff
Hey isn't there a.duck that can do that in a
Donald duck movie.
Anyways you should count me out since this was
To be.a scientific educated game not a pic a # game
Thanks steyr223 rob
Sorry guys.,you all did notice my
Guess was.not based on science or math
But my name hence, 223 which i guess for
U guys across the pond is 5.56 :lol:
Go figure, i wish i could do that.with refining
My stuff
Hey isn't there a.duck that can do that in a
Donald duck movie.
Anyways you should count me out since this was
To be.a scientific educated game not a pic a # game
Thanks steyr223 rob
Congrats to steyr233!
May we agree that a yield of 0,1X% is a typical one for gold plated pins? We have this discussion over and over again with new users, but wishful thinking wont pay the rent.
If you buy or harvest "average type" gold plated pins expect around 0,1% or roughly 1g per Kilo/ 0,5g per lbs and you are in a realistic range.
If more comes, enjoy.
May we agree that a yield of 0,1X% is a typical one for gold plated pins? We have this discussion over and over again with new users, but wishful thinking wont pay the rent.
If you buy or harvest "average type" gold plated pins expect around 0,1% or roughly 1g per Kilo/ 0,5g per lbs and you are in a realistic range.
If more comes, enjoy.
steyr223
Well-known member
Yes i have rid myself of the pin monster
But still have 15lbs of the springy ones
I am cutting all the heads off untill i get l lb
I believe from the cell showing me that the heads
Took longer meaning more concentrated i
Should get more :lol:
Ok really only one more try maybe I'll get 1 whole
Percent......wait no thats 4.8grams
Ok maybe .4%
I will post my resultd but first to my ceramic chips
A gram in each one ...right :mrgreen:
But still have 15lbs of the springy ones
I am cutting all the heads off untill i get l lb
I believe from the cell showing me that the heads
Took longer meaning more concentrated i
Should get more :lol:
Ok really only one more try maybe I'll get 1 whole
Percent......wait no thats 4.8grams
Ok maybe .4%
I will post my resultd but first to my ceramic chips
A gram in each one ...right :mrgreen:
This post is a year old but I'm wondering if iron worth it to buy 10 ozs (not troy) for all out $262 I've attached a photo.Hye all. I am looking for a bit of help on the yield on a mix of pins. The batch is 1850 g. ( 4.07 pounds). The pins are quite a mix, with lots of flash and partial plate mixed with higher grade full heavy palate material. I am looking for a serious, educated assessment based on what you see in the photos. I will PM each reply with my estimate if you would like. I don't want to post it yet and bias the answers. I will answer any questions as they arise, if any. Thanks in advance, glondor
I have not done any e-scrap refining before so I'm just not sure if the buy is worth it. Any help here would be appreciated. My guess says the yield would be too low. I don't have alot of info on pins just the plating is like 10 - 30 micro inches.
Attachments
Glondor has not been here for a year now.
