Welcome In!

Gold Refining Forum

Help Support Gold Refining Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hello to all community! here below my personal data:
Name : Pastorman75
Sex : Male
Age : 48
Location : Italy
Profession : Mechanical and Process engineer
Hobbies : Mechanics, Copper and Gold Refining Process, Motorbikes, LEGO bricks
Interests : Project financing, Coding, Induction furnace, other...
How long have you been refining gold or have interest in precious metals? : since 2009
What are you looking for in our community? : Knowledge exchange about PMs recovery methods
How did you discover our Forum? : surfing in the net....

In 2009 I started tio work for an italian company that is focused on precious metal refining plant starting from goldsmith scrap materials but alsio from industrial waste. They both have standard machines but also design turn key plants worldwide. I worked for them until 2017 and I learnt a lot about precious metal recovery and refining process. In the last year of my service to them, I design a TBRF furnace that arrange burning process of E-waste scrap, melt it with adding some fluxes and borax and also the machine is able to became a Copper converter by the use of an oxigen lance.
Now I have my own company and I work as a consultant in the field of precious metal recovery plant and in other sector of industrial production.
I hopeI can share with the community my experience in this matters!

Thanks in advance to everybody here!
Welcome to us.
It seems we might learn quite a bit from you.
I hope we can teach you a thing or two as well.
Again I'm looking forward to your stay here.
 
The TBRF (top blown rotary furnace) is a versatile piece of equipment. Not applicable to a lot of our members but still useful to know about.
Unfortunately Italimpianti’s ability to communicate well in English and service their gear is in need of improvement.
 
Name; Rusty is my name. My family and friends know me as Bunz. I raise bunny for food.
Sex; not in a long time (lol)
Age; too old
current location; Seal Rock - Oregon
Profession; by trade pipefitter, welder fitter, steam fitter
Hobbies; metal detecting, bunny's
Interests; environment, ocean health
how long. I have not refined gold. I have had an interest in precious metals for 50 years
I discovered your forum when I was researching how to refine silver out of silver nitrate using SAC. I could not find what SAC was. In searching for that meaning I found this site, when someone like me was asking the very same question. I am not a chemist. Do I want to put the silver in solution using nitic acid and then leech the silver using an electrode and basically grow silver crystals from the solution or do I want to cement the silver from the solution? What are the pros and cons to each of those?
Hi Bunz. May be SAC stay for "Saccarose". Indeed a quick way to collect metallic silver from Silver Nitrate is to use NaOH and after Destrose or Saccarose. In the forum the procedure is very well known and described.
I hope this will help you. Bye
 
The TBRF (top blown rotary furnace) is a versatile piece of equipment. Not applicable to a lot of our members but still useful to know about.
Unfortunately Italimpianti’s ability to communicate well in English and service their gear is in need of improvement.
Ahahah.....I never talk about the name of the company but you are right 4metals!
First TBRF was design in late 2015 to treat E-waste with a medium grade of PMs ( more than 120 grams/ton).
Special carefull have to be used in the system we have to install to respect air pollution strictly regulation.
Bye
 
Welcome to us.
It seems we might learn quite a bit from you.
I hope we can teach you a thing or two as well.
Again I'm looking forward to your stay here.
Hi Ygg! I've some experience in this field but I more close to a plant designer than a chemistry expert....of course I learnt several tricks and hint about acqua regia method but this come from the field and not from the book. So....half of the story is missing!! Several guys here are very very competent and well skilled. I'm the first that have to learn something here!! Stay in touch!! Bye
 
Name : Bill Goins
Sex : M
Age : 54
Location : Columbus, IN
Profession : Purchasing
Hobbies : Building Custom Fishing Rods, Fishing, going to auctions
Interests : refining precious metals
How long have you been refining gold or have interest in precious metals? : i have been reading and watching videos for over 3 years now. I Haven’t refined anything yet. Just starting to purchase some gold & silver. I have a lot to learn before actually trying to refine anything myself.
What are you looking for in our community? :
How did you discover our Forum? : Google searching refining scrap gold
 
Name : Bill Goins
Sex : M
Age : 54
Location : Columbus, IN
Profession : Purchasing
Hobbies : Building Custom Fishing Rods, Fishing, going to auctions
Interests : refining precious metals
How long have you been refining gold or have interest in precious metals? : i have been reading and watching videos for over 3 years now. I Haven’t refined anything yet. Just starting to purchase some gold & silver. I have a lot to learn before actually trying to refine anything myself.
What are you looking for in our community? :
How did you discover our Forum? : Google searching refining scrap gold
Welcome to us.

Here is for your studies into this complex fascinating topic.

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: Screen Readable Copy of Hoke's Book
2. Then read the safety section of the forum: Safety
3. And then read about "Dealing with waste" in the forum: Dealing with Waste

Suggested reading: The Library

https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Name : Ben
Sex : Male
Age : 34
Location : Nashville, TN
Profession : Entrepreneur
Hobbies : Sports, family and gardening
Interests : Finance, Sports and outdoors
How long have you been refining gold or have interest in precious metals? : I have no experience in refining but I have been interested for a couple of years now.
What are you looking for in our community? : I am interested in refining gold and silver from industrial sources I have procured.
How did you discover our Forum? : Google
 
Name : Ludovic
Sex : M
Age : 38
Location : Virginia
Profession : Program Manager
Hobbies : Family, soccer, gaming
Interests : Sometimes I feel there is too much, lol
How long have you been refining gold or have interest in precious metals? : Never, but want to start
What are you looking for in our community? : To learn and enjoy this as a hobby
How did you discover our Forum? : Reddit
 
Name : Ludovic
Sex : M
Age : 38
Location : Virginia
Profession : Program Manager
Hobbies : Family, soccer, gaming
Interests : Sometimes I feel there is too much, lol
How long have you been refining gold or have interest in precious metals? : Never, but want to start
What are you looking for in our community? : To learn and enjoy this as a hobby
How did you discover our Forum? : Reddit
Welcome to us.

Here are something to study before you break open any bottles of chemicals.

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: Screen Readable Copy of Hoke's Book
2. Then read the safety section of the forum: Safety
3. And then read about "Dealing with waste" in the forum: Dealing with Waste

Suggested reading: The Library

https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Name : Tim
Sex : M
Age : 43 maybe.... 44.....? I find out once a year in a card.
Location : UK
Profession : Path labs
Hobbies : Mechanical tinkering mostly but as kids grow up and 'free' time becomes more of an option....
Interests : Currently my focus is on 'adapting' the Kanto Denka process down to be effective for the hobbyist refiner with an eye on emission reduction.
How long have you been refining gold or have interest in precious metals? : 3 - 4 yrs or so although all theoretical at this point.
What are you looking for in our community? : A knowledge base and sounding board. I am socially awkward so posts may well be limited even from behind a screen.
How did you discover our Forum? : Net surfing.
 
Name : Tim
Sex : M
Age : 43 maybe.... 44.....? I find out once a year in a card.
Location : UK
Profession : Path labs
Hobbies : Mechanical tinkering mostly but as kids grow up and 'free' time becomes more of an option....
Interests : Currently my focus is on 'adapting' the Kanto Denka process down to be effective for the hobbyist refiner with an eye on emission reduction.
How long have you been refining gold or have interest in precious metals? : 3 - 4 yrs or so although all theoretical at this point.
What are you looking for in our community? : A knowledge base and sounding board. I am socially awkward so posts may well be limited even from behind a screen.
How did you discover our Forum? : Net surfing.
Welcome to us.

We kind of use a similar thing as vacuum scrubbing through dilute Peroxide and then NaOH to clean any off gassing from Nitric processes.
Or we just use reflux or lid and add a bit of Peroxide to the solution to remove any red fumes.
There is more than one way to skin a cat you know.
Another way to do it is to add the Nitric very slowly then it will not produce much fumes at all.

Anyway here are some links to read for you.

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: Screen Readable Copy of Hoke's Book
2. Then read the safety section of the forum: Safety
3. And then read about "Dealing with waste" in the forum: Dealing with Waste

Suggested reading: The Library

https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Name: Casey Curtis
Sex: Male
Age: 34
Location: Montrose County, Colorado
Profession: Carpenter; finish, trim, framing
Hobbies: Rock Hounding, precious metal specimen collecting, prospecting, hiking, fishing, hunting, smelting, tinkering.
How long have you been refining Gold, or had interest in precious metals?: I started collecting Silver ore specimens from a mine dump a little over a year ago. I have no formal education in Geology, or anything similar, but I quickly became enthralled (some would say obssessed) with precious metals, specifically Silver.
What are you looking for in our community?: Knowledge, experience, conversation, useful tips, and trade secrets.
How did you discover our forum?: Google
 
Name: Casey Curtis
Sex: Male
Age: 34
Location: Montrose County, Colorado
Profession: Carpenter; finish, trim, framing
Hobbies: Rock Hounding, precious metal specimen collecting, prospecting, hiking, fishing, hunting, smelting, tinkering.
How long have you been refining Gold, or had interest in precious metals?: I started collecting Silver ore specimens from a mine dump a little over a year ago. I have no formal education in Geology, or anything similar, but I quickly became enthralled (some would say obssessed) with precious metals, specifically Silver.
What are you looking for in our community?: Knowledge, experience, conversation, useful tips, and trade secrets.
How did you discover our forum?: Google
Welcome to us.

If you by any chance are going to handle chemicals we want you to study first.
Here are some links for that:

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: Screen Readable Copy of Hoke's Book
2. Then read the safety section of the forum: Safety
3. And then read about "Dealing with waste" in the forum: Dealing with Waste

Suggested reading: The Library

https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Hi there i have reading the forum for a while but have now joined! I am based in Idaho United States and while I have not refined PMs personally yet, I am wanting to learn! I have been looking into urban Ewaste-Minning since 2017 and have questions and thoughts about what I have found as well as various ways of getting into that world. for hobbies I am a Guitar Player, entrepreneur and hobbyist inventor. i was told about you guys thru a refining friend of mine.
 
Hi there i have reading the forum for a while but have now joined! I am based in Idaho United States and while I have not refined PMs personally yet, I am wanting to learn! I have been looking into urban Ewaste-Minning since 2017 and have questions and thoughts about what I have found as well as various ways of getting into that world. for hobbies I am a Guitar Player, entrepreneur and hobbyist inventor. i was told about you guys thru a refining friend of mine.
Welcome to us.

This is the most comprehensive place for refining I know about.

If you are going to process something we like you to read these links.

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: Screen Readable Copy of Hoke's Book
2. Then read the safety section of the forum: Safety
3. And then read about "Dealing with waste" in the forum: Dealing with Waste

Suggested reading: The Library

https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Name: Steve
Sex: Male
Age: 34
Location: Pennsylvania
Profession: Gold Recovery/Refining
Hobbies: Astronomy, Fishing/Camping, Finance, Family
How long have you been refining Gold, or had interest in precious metals?: I have worked for a company that recovers gold for 10 years now. No prior experience before that.
What are you looking for in our community?: An understanding of how to get through to customers looking for the reclamation of gold.
How did you discover our forum?: Google
 
Name: Steve
Sex: Male
Age: 34
Location: Pennsylvania
Profession: Gold Recovery/Refining
Hobbies: Astronomy, Fishing/Camping, Finance, Family
How long have you been refining Gold, or had interest in precious metals?: I have worked for a company that recovers gold for 10 years now. No prior experience before that.
What are you looking for in our community?: An understanding of how to get through to customers looking for the reclamation of gold.
How did you discover our forum?: Google
Welcome to you.

Here is for your studies:

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: https://goldrefiningforum.com/phpBB3/viewtopic.php?f=54&t=19798
2. Then read the safety section of the forum: https://goldrefiningforum.com/forums/safety.47/
3. And then read about "Dealing with waste" in the forum: https://goldrefiningforum.com/threads/dealing-with-waste.10539/

Suggested reading:
https://goldrefiningforum.com/forums/the-library.101/
https://goldrefiningforum.com/threads/when-in-doubt-cement-it-out.30236/
https://goldrefiningforum.com/threa...le-read-this-before-you-post-about-ore.33333/


Forum rules is here.
https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
 
Welcome to you.

Here is for your studies:

We ask our new members to do 3 things.
1. Read C.M. Hokes book on refining jewelers scrap, it gives an easy introduction to the most important chemistry regarding refining.
It is free here on the forum: https://goldrefiningforum.com/phpBB3/viewtopic.php?f=54&t=19798
2. Then read the safety section of the forum: https://goldrefiningforum.com/forums/safety.47/
3. And then read about "Dealing with waste" in the forum: https://goldrefiningforum.com/threads/dealing-with-waste.10539/

Suggested reading:
https://goldrefiningforum.com/forums/the-library.101/
https://goldrefiningforum.com/threads/when-in-doubt-cement-it-out.30236/
https://goldrefiningforum.com/threa...le-read-this-before-you-post-about-ore.33333/


Forum rules is here.
https://goldrefiningforum.com/threads/gold-refining-forum-rules.31182/
I do appreciate it. I work for a business who's business is recovering gold. I actually am working on some jewelry right now.
 

Latest posts

Back
Top